Home > News > Content

Product Categories

Yantai Jamaica New Energy Tech.Co.,Ltd

Add: Donglai Street 67, Longkou, Yantai, Shandong, China

Contact: LIANG XIAO LI

TEL: 86-535-3488227

Phone: 86-13954599190

E-mail: 46510015@QQ.COM

liang@jmtecchina.com

www.jmtecchina.com

AKD Sizing Agent Spread Performance
Oct 09, 2017

In the production of high-performance carbon fiber, AKD Sizing Agent carbon fiber sizing process is an indispensable link. On the one hand, the sizing process can form a functional organic polymer layer on the surface of the carbon fiber, optimize the wear resistance, the bundling and spreading performance of the carbon fiber, adjust the dryness and elasticity of the fiber, inhibit the production of the wool during the processing and use of the carbon fiber, To adapt to the process of forming composite materials weaving, AKD Sizing Agent laying and winding process requirements. On the other hand, the sizing process in the inert carbon fiber surface formed by the organic polymer layer, can improve the carbon fiber and matrix wettability, bonding ability, the composite material forming a good interface between the fiber and the matrix to improve the carbon fiber and matrix Between the interface bond and the composite material of the interfacial shear strength (ILSS). At the same time, by changing the molecular composition of the main components of the sizing agent system, the application of carbon fiber in different resin matrix is realized, and the diversification and adaptability of carbon fiber products and corresponding composites are formed.

In the production and processing of carbon fiber, due to the brittleness of carbon fiber, repeated mechanical friction will cause the fiber monofilament fracture, the formation of wool. AKD Sizing Agent 60% -70% of the carbon fiber used for composite materials need to go through the process of weaving, preparation of prepreg. When the carbon fiber woven on the loom, due to the constant suffering from stretching, friction, bending and other effects, carbon fiber will be fluffy, loose or split the phenomenon, making the preparation is difficult to carry out, the fabric quality is low. The hair will hinder the matrix resin from infiltrating the fibers, causing the pores of the composite material to affect the final composite properties. Sizing can be combined with wool, so that carbon fiber bundles, improve the carbon fiber post-processing performance. Carbon fiber can also act as a lubricant to protect carbon fibers and reduce the coefficient of friction.

Carbon fiber sizing agent as a wetting agent, AKD Sizing Agent coated on the surface of carbon fiber, can improve the fiber surface of the resin wetting ability to shorten the preparation time of composite materials and improve product performance.

The importance of the sizing agent to the composite material is that the sizing layer can be used as a link between the fiber and the resin to transfer the load between the substrate and the reinforcement. The active high polymer layer formed on the surface of the carbon fiber is soaked that the original high inert carbon fiber can react effectively with the substrate to improve the interfacial strength of the carbon fiber composite. However, if the composition of the sizing agent is not selected properly, AKD Sizing Agent the interface performance is not improved Role, and even on the interface between the two phases have a negative effect, is not conducive to the performance of composite materials play. To achieve the purpose of improving the interface, must be selected for a specific substrate or the development of the corresponding sizing agent main pulp.


Quick Navigation
  • About Us
  • Products
  • News
  • Exhibition
  • Contact Us
  • Feedback
  • Newsletter
    Enter in your email address to receive deals and coupons.
    +86-535-3488227
    +86-13954599190 liang@jmtecchina.com